BB Instructions

BagButton LLC.

Made in America.

Start with your item in the bag. Twist the remaining end of the bag up like a rope and slip on the o-ring with the o-ring, tab down.

Pushing the o-ring all the way down on top of your items in the bag.

Untwist the bag, spreading it open and fanning out over your items like a flower.

Position BagButton on top of bag and over the o-ring, press the o-ring and bag up firmly into the bottom cavity of the BagButton. This seal the bag between the o-ring and BagButton.

Evacuate the air with your vacuum cleaner. Here we are using a Dewalt 2 gallon cordless (18V) battery operated shop vacuum. It works just as well as our house vacuum. Cordless = portable.

We also use a 16 inch hand pump, (raft-pump) These can be purchased at most sports stores. The BagButton was designed to be used with 99% of the inflate-deflate hand pumps on the market.

Using the hand pump. Shove the tip of the hose through the BagButton’s opening as far as the hose will go and with the pump on deflate, remove the air. The hand pumps are faster than the vacuums. Hand pumps = portable vacuum storage space bags.

After the air has been removed, cap off BagButton! Grasp BagButton, lift & twist 2 times to seal the vacuum. Grasp remaining bag as your handle and pull to release and separate the BagButton from the o-ring. Twist up bag once again to remove o-ring and tie off bag.

BagButton Instructions

This is a 20 second video on how to apply the BagButton. In this demo we are using an 18 volt battery powered Dewalt vacuum. Battery power = portable.